Professional Key Fob Programming Tool: XTOOL InPlus IK618 With KC100 & EEPROM ADAPTER

• Comprehensive IMMO/Key Programming Functions: X100 InPlus IK618 combines advanced key programming and immobilizer capabilities with OE-level diagnostics, equipped with KC100 key programmer and EEPROM adapter, has the IMMO capatibilities like Read PIN, Add Transponder Key, Smart Key/Key Fob/Dealer Key, Remote Learning, ideal for auto technicians, advance DIY, garage and locksmiths!
• Work with XTOOL Key Programmers to Extend IMMO Capabilities: work with KC501 for BMW EWS2/3/4, CAS4/3/2/1, for Porsche, for Audi, for Land Rover, for Volvo key programing etc; work with KS1 for Toyota, for Lexus Smart Keys A_K_L, work with M821 for Mercedes for Benz A_K_L, M822 for Toyota 8A Blade Key A_K_L, etc.
• ECU Coding & Guide Functions for VW: Performs Advanced ECU Coding like Offline ECU coding, match the components, enhance the vehicle performance, fits for VW/for AUDI/for SKODA. Performs VAG Guided Functions to provides step by step instructions to fast complete complicated functions for VW/for AUDI/for SKODA.
• Refresh Hidden Functions: Enable to flash the higher-level car functions and personalize the car settings. Note: Only compatible for BMW/for VW/for AUDI/for SKODA/for TOYOTA/for LEXUS/for SCION/for MAZDA/for FORD/for LINCOLN.
• 31+ Maintenance Services: Oil Reset, EPB, SAS, BMS, Throttle, TPMS Reset, Gearbox Match, Suspension, ABS Bleed, Injector Coding, Power Balance, Airbag Reset, H/V Battery, EEPROM, A/F Reset, Start/Stop Reset, Tire Upgrade, etc.
• Advanced Special Functions: InPlus IK618 also has advanced features like CAM Crank Relearn, Crankshaft Relearn, Idle Relearn, Fuel Trim Reset, Alcohol Content Reset, ABS Initialization, VIN Relearn, HVAC Calibration, and so no. Note: Not universal. Check compatibility with VIN# first before purchase.
• Bi-Directional Control: Full control over all various vehicles components to perform active tests like idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Window/Mirror/Door Lock Test, etc.
• "Dealer-Level" Full Systems Diagnostics: XTOOL IK618 diagnostic tool has the abilities as OEM tools to perform all available systems diagnostic to view all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Eng*ine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.
• Smart AutoScan & AutoVIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostics.
• Broad Vehicle Coverage & Support CAN FD Protocols: Access new communication protocols of CANFD (cover for GM MY2020+ models) without extra adapter. It covers 10000+ Vehicles includes American, European, Asian, Japanese brands makes, etc.
• Strong Hardward Configuration: Android 5.1 systems, 7'' Touch Screen, 5000mAh Battery, 1024*600 Resolution, Quad-Core 1.6GHz CPU Processor, 2G RAM & 32G, Dual WiFi
• 2 Years Software Udpate & Support 14+ Languages & Remote Tech Help: If you need any help, please do not hesitate to let us know via xtool direct @ outl oo k . c o m.

XTOOL InPlus IK618 with Complete IMMO& key FOB Programming Abilities, Upgraded Ver. of X100 PAD PLUS/PADS

• Backup IMMO data: Used to read, write and backup the EEPROM chip inside the immobilizer module.
• Check number of keys: check out how many keys that had been registered to the vehicle right now.
• Read PIN code& key info: Pull PIN code of the immobilizer of specific vehicles when it requires a pin to get access to the system.
• Program/Add keys Fobs: Add another new key when you have a key that has already matched to the vehicle.
• Generate dealer key: Used for generating dealer keys for Volkswagen/ for Audi/ for Fiat/for Renault/for BMW/for Land Rover, etc.
• Program remote: Read the radio frequencies of the car remotes and program remote keys.
• All keys losst: Make a new key in the situation where you have no active keys at the moment.
• EEPROM modification: Allows you to modify EEPROM chip when unsoldered.
• Write-enable functions: Allows you to write key information inside the dump files.

NOTE: All the mentioned functions vary across vehicles. Please check compatibility with us before purchase!

NOTE: IK618 support pull pin codes for Dodge Ram 2013-2018.

NOTE: IK618 support pull pin codes for Dodge Charger/Challenger/300C 2015-2018.

NOTE: IK618 support read pin codes from OBD for FCA Group(for Fiat/for Chrysler/for Dodge/for Jeep), via VPW protocol.

NOTE: IK618 cannot support FBS4 infrared key for Benz.

NOTE: Not al l vehicles of the car makes mentioned can be supported, please check before purchase via xtool direct @ outl oo k . c o m.

Advanced ECU Coding-Customize Car Settings and Enhance Vehicle Performance!

>> Advanced ECU Coding:

• ECU Coding for VW/for AUDI/for SKODA/for BENZ/for Mitsubishi: XTOOL IK618 automotive diagnostic scanner performs ECU Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.
• Flash Hidden Functions(ECU Configuration) for BMW/for VW/for AUDI/for SKODA/for TOYOTA/for LEXUS/for SCION/for MAZDA/for FORD/for LINCOLN: IP819TP helps to activate the higher-level car functions and disable any annoying features including ✔disabled the seat belt buzzer, ✔wind the windows down with the remote fob, ✔deactivate the Start/Stop function, ✔etc.
• V.A.G Guided Function for VW/for AUDI/for SKODA: Featuring guided functions, the IK618 XTOOL key programmer immobilizer allows you to complete the complicated functions under the step by steps instructions with no troubles and no worries.

Note:

Only compatible for the car makes mentioned, please check via xtool direct @ outlook. com.

Not support ECU programming, flash or reprogram modules.

OE Level Full Diagnosis & Bi-Directional Controls, Upgraded Version of X100 Pad Plus

>>OE-level Full Systems Diagnostics:

XTOOL IK618 car diagnostic tool performs deep diagnosis through all available systems, subsystems, modules on your vehicles like ECM, BCM, ABS, SRS, EPS, TPM, PDM, BMS, SAS, HVAC and etc., with complete capabilities: Read&Clear Co*des, Freeze Frame, Retrieve ECU information, Display live data stream in text or graph: like misfire data, transmission fluid/Oil temperature, cylinder balance rates, eng*ine rpm, fuel pressure, actual fuel temperature vs desired fuel temperature and etc.

>>Bi-Directional Control(Active Test):

XTOOL InPlus IK618 bidirectional scanner supports active test to output the command into the ECU to request information or command a module to perform specific tests and functions. To find faults in the subsystems of your car effortlessly, without using the vehicle’s control, including Injector Buzz Test, Window/Mirror/Door Lock Test, A/C Clutch On/Off, ABS Pump Cycling, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, More...

XTOOL InPus IK618 Newest Auto Diagnosic Scan Tool

• Key Programming/IMMO: Disable the lo~st vehicle keys and program a new replacement key fob.
• Oil Reset: Reset service intervals after oil change and turn off the oil light.
• EPB Reset: Reset brake pads after replacement of brake system.
• SAS Adjustment: Perform calibration of the steering angle sensor
• BMS Reset: Register the new battery to the ECU after replacement.
• Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.
• ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.
• Injector Coding: Coding injectors after replacement.
• Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.
• Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose eng*ine misfires more accurately.
• EEPROM ADAPTER: EEPROM chip stores the immobilizer data (like pincode) and odo~meter data, and sometimes you need to unsolder it to read & write the data inside the chip, flash the data, write start, data recovery, and so on.

>> Get the full special functions under specific systems: Steering position sensor calibration, Zero Point Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Injector balance test, ECU Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Crankshaft Sensors Relearn, Window Initialization, TPMS Reset, Suspension, Injector Coding, Airbag Repair, Cylinder Power Balance, Seat Configurations, Electronic Pump Activation, Disable Transportation, Performance Tire Upgrade, ECU configurations, A/F reset, Language change, Start/Stop Reset, etc.

Note: ALL the service functions available vary across vehicles. Please come to us to check compatibility with car VINs.

Add Extra Adapter to Expand more Advanced IMMO Functions(additional order required)

• KC501 needed & M821 Adapter needed (Not included): for Mercedes-Benz FEM3 All keys losst situation
• Chrysler 12+8 SGW cable needed(B0B4D76NWB): for 2019+ models from FCA Group (for Fiat/for Chrysler/for Dodge/for Jeep)
• KC501 needed(B09PQL4WSF): for Land Rover/for Jaguar 2015-18 key matching via OBD
• KS-1 Key Programmer needed(B09SNWWVX3): for Toyota/for Lexus models with smart keys All keys losst situation
• Nissan CGW cable needed(Not included): for Nissan Sylphy/Sentra (B18) 2019+ key programming
• Works with M822 Key Programmer (not included): for Toyota 8A chip blade key programming;

NOTE:

IK618 package includes KC100+EEPROM Adapter.

Above adapter(KC501/KS-1/M821/M822/for Chrysler 12+8 cable/for Nissan CGW cable need addtional order).

Please reach out to xtool direct @ outl oo k . c o m if your vehicle requires extra adapter for key programming.

Best for Technician, Mechanic, Auto repair shop & Locksmith

XTOOL InPlus IK618 is a comprehensive immobilizer and key programming tool and ideal for auto technicians, locksmiths, advance DIY, auto repair shop, garage, car dealer and home mechanic. Equipped with Android system, Quad-Core 1.6GHz CPU Processor, 2GB RAM & 32GB ROM, which greatly increased the speed of running multiple task. With 5000mAh stronger rechargeable battery lasts up to 8 hours of continuous use, 2.4GHz&5GHz Dual-Frequency Wi~Fi, built-In Speaker, Microphone, supports external sound playback.

Package List: KC100, EEPROM Adapter, EEPROM PCBA*2, DB15 Main Cable, OBD2-16, USB 3.0 Data Cable, USB-C Cable, Charger for Tablet, US/EU Power Cable, User Manual, Tool Case

Note: We recommend not downloading all vehicle software, but only downloading what is necessary to maintain running speed. If storage space is a concern, you can delete any unnecessary software.

Note: If you have any issues including defective devices or needing instructions, please come to us. (xtool direct @ out look . com)