2024 New Release Affordable Scanner---Pay for Itself!

InPlus IP616, as a cost-effective auto diagnosis tool, is one of the XTOOL InPlus series, helping to precisely locate car problems.

>>Lifetime Free Software Update: Please do not miss, no extra subscripton fees, cost-effective IP616 meets your needs!

>>“Dealership-Level”Full Systems Diagnosis: Comprehensive capabilities to troubleshoot all available systems and perform deep diagnostics for 80+ global vehicles’brand. *Note: support 12V sedans, light duty trucks, SUVs, mini vans. Not support Heavy duty trucks or motorcycles.

>>31+ Service Functions: Packed with most commonly used resets, relearns, matchings, adaptations, initializations for daily maintenance. *Note: Functions compatibility vary across vehicles. Please reach to us before purchase!

>>Flash Hidden Function: Allow to activate the higher-level car functions, such as disable daytime running lights, disable the seat belt buzzer, control rear-view mirrors' folding and unfolding, control the windows up/down with the remote fob, and more. *Note: Only compatible for BMW/for VW/for AUDI/for SKODA/for TOYOTA/for LEXUS/for SCION/for MAZDA/for FORD/for LINCOLN. Not support ECU coding or programming!

>>Worth-Buy Additional Features: ✔ Support 14+ menu languages, ✔ 7-inch Display screen with 1024×600 resolution, ✔ 32GB on-board memory and built-in 5000mAh battery, ✔Support CanFD protocol, ✔2-year wa-rran-ty, etc.

>>One Click WIFI Update: Easily get updated via WIFI. Continuously improve the functions software, coming with more vehicles covered!

>>Warm Notice:

• Never Work Alone: Once you order from XTOOL, 24/7 service will always team up with you to provide professional operation procedures, repair suggestions, or verify the functions compatibility, etc. *Please reach to us via xtooldirect @ out look . c o m directly.
• Remote Assist: Thoughtful 1v1 online remote technical assistance to effectively solve your problems when needed.

Accessible to All Systems-InPlus IP616 Car Diagnostic Tool

Allows you to pinpoint problems hidden underneath the systems such as ECM, BCM, ABS, SRS, EPS, TPM, PDM, BMS, SAS, HVAC and etc. to dive into accurate all systems information.

• Read&Clear Codes: turn off warning lights and reset monitors and clear DTCs.
• DTCs Look Up: help to locate the problem and learn the definition of the DTCs.
• Live Data Graphing: ✔combine 8 PIDs mostly in one graphing to ✔check the work status of modules, ✔include emission, misfire, O2 sensor data, MAP/TPS value, mass airflow, clutch sensors, water/trans oil/coolant/fuel temp, cylinder balance rates, long/short fuel trim, engine rpm, battery voltage, wheel speed sensor, fuel rail pressure, etc., ✔support data record/playback.
• Display up to 8 Individual PIDs in One View: New live data graphing feature allows you to check multiple PIDs graphing at the same time.(Please scroll down the screen to check all 8 graphing.)
• Retrieve ECU information, Freeze Frame
• ALL 10 Modes OBD2 Functions: O2 Sensor monitoring test, I/M Readiness, Component test, On-board Monitor Test (Mode 06), retrieve vehicle information, read codes, clear codes, data stream display, freeze frame, etc.
• Auto VIN&SCAN: 4-Way to detect vehicles by Auto Scan/Manual Input VIN/Automatic Detection/Manual Selection.

>>>Note:

• AUTO SCAN does not work on all vehicles, try other three ways instead if Auto Scan is not available.
• InPlus IP616 does not have Bi-directional control abilities! If you need it, you can consider XTOOL D7W!
• Internet needed to be connected when diagnose for Peugeot/Citroen vehicles.

One-Stop Solution: 31+ Advanced Reset Services

Most Commonly Useful Maintenence Services:

• ABS Bleeding: Cycle the ABS pump to bleed the air out of the ABS to restore the braking sensitivity.
• Oil Reset: Reset the service and zero oil light once changed the oil.
• Throttle Relearn: After clearing or repairing the electronic throttle, re-learning and adapt throttle sensor position.
• EPB Reset: Reset the calipers, brake discs or pads after the electronic parking brake system is repaired or replaced.
• TPMS Reset: Perform tire pressure reset after replace the tire or sensors when the tire pressure is insufficient.(If you need TPMS programming or activation, you can consider IP819TP Scanner with Full TPMS Services!)
• Gearbox Match: Reset the adaptive shifting points to match the gearbox after replacing.
• BMS Reset: Reset the monitoring unit of the car battery after replacement.
• Injector Coding: Write the new injector code into ECU to correct cylinder injection quantity.
• Airbag Repair(SRS): Reset the airbag data after replacing the airbag.

More functions waiting for explore:

Steering Angle Sensor Adjustment, Gearbox Match, Headlight, Air Suspension, Gear Learning, EEPROM (adapter not included), Performance Tire Upgrade, Power Balance (for Ford, for GM), Seat Configurations, A/F Settings, Window Initialization, Electronic Pump Activation (for BMW, for MINI), Disable Transportation, Stop/start Reset, Language Change, Instrument Cluster, Flash Hidden Functions, HV Battery (Check HV battery pack voltages), A/C Relearn, VGT Relearn.

>> NOTE:)

Service Menus vary by vehicle. Please reach to us or QA with the car Make/Model/Year & Vin & Functions to check compatibility before purchase!

Support 10000+ and more growing 12V vehicles (Not work on 24V heavy duty trucks) after 1996 with OBDII

It supports for over 85 global vehicle brands, no need to pay extra subscription for specific car make!

What's more:

• Work with 12+8 Cable Adapter (Package NOT Included): Support for Chrysler 2018 and later vehicles.
• Support CAN FD Protocol: Work for GM/for GMC/for Cadillac/for Chevrolet/for Buick Cars after 2020.

Multi-lingual features:

• 14+ Languages Options: including English, Spanish, French, German, Arabic, Russian, Italian, Polish, Portuguese, Finnish, Japanese, Korean, Vietnamese.

What’s in the box:

• IP616 Tablet, OBDII Main Cable, USB Cable, Tablet Charger, US Adapter, EU Adapter, EN Adapter. As for charging the IP616, please combine the tablet charger, USB cable, US adapter together to work.

Note:

• To check compatibility, please provide VIN #, vehicle make, model, year, engine via via xtooldirect @ out look . c o m!
• The default language on scanner is English, please send us the S/N (on the back of the tool) to change to Spanish or French or other.
• Please fully charge the scanner before using and shutdown it after using.