XTOOL X100 PAD3 Professional Key Fob Programming Tool---2024 Newest Upgraded Version

XTOOL X100 PAD3 is a professional and comprehensive automotive diagnostic scan tool that combines powerful Key Programming capabilities, full Systems Diagnostics and various Maintenance Services.

NOTE: NOT ALL MODELS ARE COMPATIBILE and FUNCTIONS VARY ACROSS VEHICLES. Check compatibility with VIN first if needed.

• Advanced IMMO/Key Programming: Read PIN, add new keys, smart key programming, remote learning, disabIe losst keys, make dealer key, , all-keys-losst, IMMO ECU Coding/Reset, backup IMMO Data, Read immokey data , etc.Equipped with KC100 key programmer, X100 PAD3 is ideal for automotive mechanics, advanced DIYers, garages, workshops, or locksm!ths who need more advanced key programming functions.
• Car Key Programmer KC100 Included: Add new keys for BMW, for Mini, for VW, of Audi etc.
• Works with Key Programmers to Extend IMMO Capabilities: Works with KS-2 key programmer for Mitsubishi All_Keys_Losst, KC501 for Mercedes Benz key programming, M821 for Mercedes Benz All_Keys_Losst, M822 for Toyota, for Lexus, 8A chip blade key programming.Note: KS-2 /KC50/M821/M822 not included.
• ECU Coding & PMI: Performs Online ECU Coding on VW, on Audi, on Skoda vehicles to match components reset adaptive values after ECU replacement and customize car settings such as turn the seat belt buzzer off to get better vehicle performance.VAG Guided Functions offer you step by step instructions while performing complex special functions. PMI is able to help you copy the data on old module to new module like ABS, BCM, EPS, etc.
• 38+ Special Functions:Commonly-used special functions like Oil Reset, ABS Bleeding, EPB, BMS Reset, SAS, Throttle, Suspension, Headlight, Injector Coding, Transmission Match, TPMS Reset, Airbag Repair, etc. Vehicle-specific functions under each vehicle included, for example, Cylinder Power Balance, Crankshaft pos. Variation learn, Zero Point Calibration, Fuel Injector Balance, Fuel Trim Reset, Fuel composition reset, sws calibration, ABS Initialization,HVAC Calibration etc.
• All Systems Diagnostics: XTOOL X100 PAD3 diagnostic tool is able to perform dealership-level diagnosis for all available systems on vehicles like Engine, Transmission, SRS, ABS, BCM, etc. Read/clear codes, check live data PIDs in text or graph, form freeze frame, read ECU Information, and perform active tests.
• Bi-Directional Controls: Control specific car components to perform active testsike EVAP test, Compression test, Cooling fan test, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Window/Door Lock//Mirror/Sunroof/Horn/Wipers Test, etc.
• CAN FD Protocol: Also works on GM MY2020+ models without needing extra adapters, covering 10,000+ Vehicles globally from America, Asia, Europe, Australia, and China. Vehicle coverage will keep growing with the frequent updates.
• UP TO 8 PIDS GRAPHING: Select and Combine Up to 8 live data elements into one chart so you can monitor them in one graph. Or display up to 8 graphs on one screen so you can compare them simultaneously.
• Data Export & Data View: Export the live data into CSV files so you can view them CSV-records on the computer via USB cable or view the live data graphs of those streams you exported on the device.
• Auto Scan: Automatically detects and scan the vehicles to speed up the process. Try other navigation ways if some vehicles cannot be detected automatically.
• 2 Years Warrant*y/Updates & Lifetime Tech Assistance: Get repairs quickly within 2 years. In 2 years after activation, you will get software updates frequently without cost to add new features, add newer vehicle coverage and improve user performance. XTOOL offers professional and reliable customer serv!ce before/after purchase all the time.

X100 PAD3 Auto Diagnostic Scanner Tool has More Advanced Key Programming Abilities, with KC100 Key Programmer & EEPROM Adapter Added on

>>>Upgraded Ver. of X100 PAD PLUS

>>>>Legal Disclaimer: Key programming comes with some risks! Any damage caused by improper operation will not be responsible by us or the product!!!

EEPROM Adapter: Used to read/write/backup the EEPROM chip data inside the immobilizer module and get the IMMO data, read pin code , etc.

KC100: expand the key programming capability on BMW, on Mini, on VW, on Audi, etc.

X100 PAD3 key programmer tool for all cars is more capable in reading pin codes than other scan tools such as on Chrysler 2013-2018.

• Read PIN ECU Synchronization
• Read ke*ys/fobs available Unlock OEM ke*y
• Program Smart Ke*ys Add Ke*ys/fobs
• All Ke*ys/fobs L0s*t Program Key Chip
• Remote Learning Backup/Restore EEPROM data
• Reset the Dashboard Make Dealer Ke*y
• D!sabIe L0s*t Keys More>>>

NOTE: X100 PAD3 is a key programmer for all vehicles’ brands but it cannot work on all models to perform key programming functions. And functions on each vehicle might be different.

If you need to confirm the compatibility, please send VIN and key pictures to us via xtoolonline @ outl ook .c om prior to order.

38+ Maintenance Services

Reset & Relearn & Matching & Adaptation & Calibration & Adjustment & Initialization

XTOOL X100 PAD3 Smart Diagnostic Tool comes with far more than 38+ special functions to help you perform vehicle maintenance.

• ABS Bleeding: Bleed the air out of the ABS system for firm brake pedals.
• Oil Reset: Reset service intervals after oil change and turn off the oil light.
• Gearbox(Transmission) Match: Match the gearbox/transmission after replacement.
• HV Battery: Disconnect the power output of the high-voltage battery to the vehicle or view the data of the small batteries in the battery pack.
• D*P*F Regen: Clear PM(Particulate Matter) from the D*P*F filter.
• VGT Relearn: Relearn the VGT Turbo after replacement.
• Throttle: Enable you to make initial settings to throttle to adjust the amount of air intake.
• BMS Reset: Register the new battery to the ECU after replacement.
• EPB Reset: Reset brake pads after replacement of brake system.
• SAS: Perform calibration of the steering angle sensor.
• Injector Coding: Code injectors after replacement.

Other commonly used maintenance services are: Power Balance, A/C Relearn, TPMS Reset, Gear Learning(Crankshaft Relearn), Suspension, Headlight, Seat Match, Tire Upgrade, Airbag Repair, Windows Initialization, EEPROM, A/F Reset, Electronic Pump Activation, Start/Stop Reset, Language Change, Transport Mode, etc.

Vehicle-specific functions including: Crankshaft pos. Variation learn, Zero Point Calibration, Cylinder Power Balance, Cam Crank Relearn, Fuel Trim Reset, Fuel Injector Balance, Fuel Composition Reset, Service Bay Test, ABS Initialization, SWS Initialization, Transmission Service Fast Learn, Idle Speed Control Reset, Steering Wheel Angle Sensor Learn, Passenger Presence Sensor Learn, HVAC Calibration, etc.

NOTE: Functions available on each vehicle are different. Please check compatibility with VIN and functions before order via xtoolonline @ outl ook .c om

XTOOL X100 PAD3 Key Fob Programmer-- Deeply Diagnose Most Vehicles with Standard OBD2 Ports

✔All Systems Diagnosis: Perform dealership-level car diagnostics on all available systems like Engine, BCM, ABS, SRS, Transmission, PCM, BMS, etc, with complete capabilities for codes, live data streams, ECU information, etc, including full OBD2 functions.

Live Data: Display live data PIDs like oil pressure, fuel temperature, coolant temperature, transmission oil temperature, fuel trim, O2 sensors, ATF temperature, cylinder balance rates, engine speed, etc. Show them in text or graphs individually.

>>You can graph up to 8 PIDs together in one graph for better comparison

>>Use the "Data Export" option to export live data to CSV files so you can perform further analysis on computer or view them in “Data View” menu on the device.

>>Use the search icon on the top right corner to quickly look up the live data you need

AUTO SCAN: Quickly detect and scan the vehicle to start the diagnosis.

NOTE: AUTO SCAN doesn't work on all vehicles, please try MANUAL INPUT, Automatic Detection or Manual Selection if AUTO SCAN doesn’t work in some cases.

✔FULL BI-DIRECTIONAL

>>XTOOL scanner X100PAD3 also has bidirectional controls that can help you perform various active tests on the specific subsystems or components like pumps, valves, motors, mirror, windows, doors, wipers, clutches, lights, injectors, solenoids, roof, horn, etc.

Popular active tests are shown as below:

Door Locks/Unlocks, Activate the Solenoid E~v~a~p Test

Window Up/Down Compression Test A/C Clutch

Front Motor Up/Down Fuel Pump Relay Injector Test

Cooling fan Test Wipers/Horn/Roof More>>>

NOTE: Actuation tests menus displayed vary across vehicles.

• Graphing: Graph live data streams up to 8
• Sharing: Share diagnostic reports via ema!l
• Printing: Print out the reports as a proof
• Export: Export the data to CSV files for better analysis
• Remote: Schedule a remote with our engineers to assist you more quickly
• Endoscope: Work with Endoscope to help you better check the vehicle health(endoscope not included)

• ECU Coding: Customize the car setting on VW, on Audi, on Skoda based on your needs.
• VAG Guided Functions: Don’t worry about the complex procedures on some functions. This will give you step-by-step instructions.
• ECU Configurations: Activate some hidden functions such as folding the rear-view mirro, or deact!vate the annoying features like turnning off seat belt chime, daytime running lights etc.
• PMI: Cope the data from old module to new module after replacement like ABS, BCM, EPS, etc.

• CAN/CAN FD/KPW Protocols: Support CAN/CAN FD/KPW Protocols, no need for adapters.
• 10,000+ Vehicles: Work on more than 10,000 vehicles currently, including 12 Volts sedans, light duty trucks, SUVs. Never stop growing!
• 14+ Languages: English is the default language. Come to us with S/N to get another language option for the software.

PREMIUM HARDWARE

X100 PAD3 car key programmer for all vehicles comes with premium hardware configurations:

• 10,000mAh 3.7V Battery 2G R A M & 64GB R O M One-Click Wi-Fi Updates
• 8-Inch Touch Screen 1024×768 Resolution
• 4 Core 1.8GHz CPU Processor 2.4GHz&5GHz Dual-Frequency Wi-Fi
• 8 MP Rear Camera Built-In Speaker & Microphone

ADD-ON: KC100 EEPROM Adapter OBD II-16 DB15 Main Cable USB3.0 Main Cable

Mini B to USB3.0 Type C Cable Charger for Tablet Charger US Adapter Charger EU Adapter

Connector Adapters: Adapter for for HONDA-3, for MAZDA-17, for KIA-20 , for HYUNDAI/KIA-10.

Note:

1. If you have registered the scanner but decide to return it, please kindly come to us to cancel your registry information in order to protect your privacy, and avoid it is resold again by accident.

2. If you received a used scanner, please come to us with the S/N via xtoolonline @ outlook .c om for new replacement.

3. Please connect this scan tool to Internet/Wi-Fi at least once in a month to protect it from being stolen.

4.Power off the tablet completely when you don’t use it to save the battery power.

5.Please power on the X100 PAD3 first by long press BEFORE you connect it to the vehicle.

6.Please strictly follow the instructions on the device when performing the functions. Key programming is an advanced function but also comes with risks.

7.Please make sure that the vehicle battery is sufficient before programming keys.